error with syslinux when using universal usb installer

Next, we create two mount points, one for the USB drive and another for the ESXi ISO we’ll mount in the next step.

usr/bin/syslinux /dev/sdc1Ĭat /usr/share/syslinux/mbr.bin > /dev/sdc Again, the location of Syslinux may differ according to the version of syslinux installed and the Linux distro used. We also need to copy mbr.bin, the file containing the boot code, to the USB drive. To make the USB drive bootable, the syslinux utility is used. The -n USBESXi bit is used to label the USB drive and can be omitted. We also need to format the partition (sdc1 in this case). Remember that you’re drive may differ from mine (sdc). sbin/mkfs.vfat -F 32 -n USBESXi /dev/sdc1 To format the USB drive, run the following command. This allows us to copy the bootloader file as well as the ESXi binaries. The partition just created must be formatted with the file system specified. Press to set the file system type to FAT32.Press to toggle the partition file system type.This step creates a primary partition for you. Press, and press Enter 3 times to accept the default settings.Press to delete any existing partitions.Pressing gives you a list of possible options. fdisk /dev/sdcĬarry out any required task by pressing the corresponding key. To this, we’re going to use the fdisk command. The next step is to prepare and format the USB drive for ESXi. Step 2 – Create a primary FAT32 partition You can check this from the Hardware tab.

If your setup is similar, make sure that the VM has a USB Controller included in the hardware list. A 1GB drive will suffice since ESXi’s footprint is roughly 350MB.įor this post, I’m running a CentOS 7 VM on VMware Workstation. This is installed on Linux via a package manager such as YUM APT, and RPM. For this post, I’m using the one for ESXi 6.5 U1. As always, I’m sticking to my CentOS 7 VM. A Linux virtual or physical machine running most Linux distros should do.If you are strictly a Linux user or prefer using Linux based methods instead, then read on since today we’ll be doing just that, creating a bootable USB pen drive with the ESXi installer on it using only Linux commands. In How to install vSphere ESXi on a bare metal server, I describe how software such as Rufus can help you create bootable ESXi media using Windows. Running the ESXi installer from a bootable USB flash drive or memory stick is a very useful method you can use to install VMware’s hypervisor.

Error with syslinux when using universal usb installer